Get a Quote

Home / Products / WAVE Air Brake Fittings / WAVE 770 Series

WAVE 770 Series — WAVE Air Brake Fittings, product photo
WAVE Air Brake Fittings

WAVE 770 Series

A robust series of fittings designed for reliability in demanding air brake systems. These fittings feature high-quality brass and plastic construction, ensuring long-lasting performance in heavy-duty truck and trailer applications.

Category
WAVE Air Brake Fittings
Material
Brass
Tube sizes
6×1 · 8×1 · 10×1 · 12×1.5 · 15×1.5 · 16×2
Thread sizes
M12×1.5 · M14×1.5 · M16×1.5 · M22×1.5
Application
Heavy-duty truck and trailer

Key Features

  • Built to DOT FMVSS 571.106 / SAE J844 requirements (DOT range)
  • High-pressure resistance
  • Corrosion-resistant materials
  • Easy installation and maintenance
  • Wide temperature operating range

About the 770 Series

The 770 Series — WAVE Air Brake Fittings is a Brass fitting from the WAVE Air Brake Fittings range. A tee fitting branches one air line into two. One supply from a reservoir or valve enters the run, and two lines leave — for example to feed two brake chambers or two circuits from a single supply. The tee keeps the air path short and the number of joints low.

Where it fits

In a truck or trailer air brake circuit, this 770 series is used where one supply must feed two consumers — for example at a tractor protection valve, where the trailer supply line begins. In the European aftermarket it is fitted to trucks and trailers running metric DIN 74324 / ISO 7628 air systems, and it is stocked by distributors as a direct replacement for the European brands.

Fitting the 770 Series

Fitting the 770 Series: To fit it, cut the nylon tube square, push it fully home into the collet until it seats, then pull it back to check it is locked. To remove it, press the release and pull the tube out. No spanner is needed on the tube side.

Sizes and standard

The 770 Series — WAVE Air Brake Fittings belongs to the WAVE Air Brake Fittings range. Material: Brass. Category tube sizes: 6×1 · 8×1 · 10×1 · 12×1.5 · 15×1.5 · 16×2. Category thread sizes: M12×1.5 · M14×1.5 · M16×1.5 · M22×1.5. Built to DIN 74324 / ISO 7628 for the European aftermarket, for use with polyamide tubing. The range covers tube 6×1 to 16×2 and threads M12×1.5 to M22×1.5; the catalogue gives -40 °C to +100 °C as the operating temperature for the couplings. A replacement for Voss, Camozzi, Raufoss, SIRIT and WIRA fittings in the European aftermarket.

Category range, not per-model data: the sizes above are the WAVE Air Brake Fittings range as published. The exact tube size, thread size and dimensions of the 770 Series — WAVE Air Brake Fittings are confirmed against the factory catalogue when you inquire — send the part number, or the tube and thread you need, and we quote the exact model.

Complete the circuit

Most buyers add the matched PA12 tubing, truck cables & coiled air lines or EBS lines to the same order — one quote, one shipment.

See companion lines →
Call +86-17825829635
Keep looking

Related products