Get a Quote

Home / Products / WAVE Air Brake Fittings / WAVE 730 Series

WAVE 730 Series — WAVE Air Brake Fittings, product photo
WAVE Air Brake Fittings

WAVE 730 Series

A robust series of fittings designed for reliability in demanding air brake systems. These fittings feature high-quality brass and plastic construction, ensuring long-lasting performance in heavy-duty truck and trailer applications.

Category
WAVE Air Brake Fittings
Material
Brass
Tube sizes
6×1 · 8×1 · 10×1 · 12×1.5 · 15×1.5 · 16×2
Thread sizes
M12×1.5 · M14×1.5 · M16×1.5 · M22×1.5
Application
Heavy-duty truck and trailer

Key Features

  • Built to DOT FMVSS 571.106 / SAE J844 requirements (DOT range)
  • High-pressure resistance
  • Corrosion-resistant materials
  • Easy installation and maintenance
  • Wide temperature operating range

About the 730 Series

The 730 Series — WAVE Air Brake Fittings is a Brass fitting from the WAVE Air Brake Fittings range. A tee fitting branches one air line into two. One supply from a reservoir or valve enters the run, and two lines leave — for example to feed two brake chambers or two circuits from a single supply. The tee keeps the air path short and the number of joints low.

Where it fits

In a truck or trailer air brake circuit, this 730 series is used where one supply must feed two consumers — for example at a relay valve outlet, where air is sent on to a spring brake chamber. In the European aftermarket it is fitted to trucks and trailers running metric DIN 74324 / ISO 7628 air systems, and it is stocked by distributors as a direct replacement for the European brands.

Fitting the 730 Series

Fitting the 730 Series: Fitting takes no tools on the tube side: the tube is cut square and pushed home until it seats, and the joint is checked with a pull. The collet grips the tube as soon as it is home, the O-ring seals it, and the joint holds under vibration and repeated pressure cycles.

Sizes and standard

The 730 Series — WAVE Air Brake Fittings belongs to the WAVE Air Brake Fittings range. Material: Brass. Category tube sizes: 6×1 · 8×1 · 10×1 · 12×1.5 · 15×1.5 · 16×2. Category thread sizes: M12×1.5 · M14×1.5 · M16×1.5 · M22×1.5. Built to DIN 74324 / ISO 7628 for the European aftermarket, for use with polyamide tubing. The range covers tube 6×1 to 16×2 and threads M12×1.5 to M22×1.5; the catalogue gives -40 °C to +100 °C as the operating temperature for the couplings. A replacement for Voss, Camozzi, Raufoss, SIRIT and WIRA fittings in the European aftermarket.

Category range, not per-model data: the sizes above are the WAVE Air Brake Fittings range as published. The exact tube size, thread size and dimensions of the 730 Series — WAVE Air Brake Fittings are confirmed against the factory catalogue when you inquire — send the part number, or the tube and thread you need, and we quote the exact model.

Complete the circuit

Most buyers add the matched PA12 tubing, truck cables & coiled air lines or EBS lines to the same order — one quote, one shipment.

See companion lines →
Call +86-17825829635
Keep looking

Related products