Get a Quote

Home / Products / Steel Air Brake Fittings / Steel Male Elbow

Steel Male Elbow — Steel Air Brake Fittings, product photo
Steel Air Brake Fittings

Steel Male Elbow

Constructed from high-strength steel for maximum pressure tolerance and durability. These fittings are engineered to withstand extreme conditions and provide superior performance in the most demanding applications.

Category
Steel Air Brake Fittings
Material
Steel
Tube sizes
6×1 · 8×1 · 10×1 · 12×1.5 · 15×1.5 · 16×2
Thread sizes
M12×1.5 · M14×1.5 · M16×1.5 · M22×1.5
Application
Heavy-duty truck and trailer

Key Features

  • Built to DOT FMVSS 571.106 / SAE J844 requirements (DOT range)
  • High-pressure resistance
  • Corrosion-resistant materials
  • Easy installation and maintenance
  • Wide temperature operating range

About the Male Elbow

The Male Elbow — Steel Air Brake Fittings is a Steel fitting from the Steel Air Brake Fittings range. An elbow fitting turns an air line through 90 degrees. It is used where a tube must leave a valve, reservoir or brake chamber and run along a chassis rail or frame member: the fitting takes the corner so the tube itself is never bent sharply or kinked. The push-in end accepts the tube, and the threaded end screws into the port.

Where it fits

In a truck or trailer air brake circuit, this male elbow is used where a line must turn at a port — for example at a relay valve outlet, where air is sent on to a spring brake chamber. In the European aftermarket it is fitted to trucks and trailers running metric DIN 74324 / ISO 7628 air systems, and it is stocked by distributors as a direct replacement for the European brands.

Fitting the Male Elbow

Fitting the Male Elbow: Fitting takes no tools on the tube side: the tube is cut square and pushed home until it seats, and the joint is checked with a pull. The collet grips the tube as soon as it is home, the O-ring seals it, and the joint holds under vibration and repeated pressure cycles.

Sizes and standard

The Male Elbow — Steel Air Brake Fittings belongs to the Steel Air Brake Fittings range. Material: Steel. Category tube sizes: 6×1 · 8×1 · 10×1 · 12×1.5 · 15×1.5 · 16×2. Category thread sizes: M12×1.5 · M14×1.5 · M16×1.5 · M22×1.5. Built to DIN 74324 / ISO 7628 for the European aftermarket, for use with polyamide tubing. The range covers tube 6×1 to 16×2 and threads M12×1.5 to M22×1.5; the catalogue gives -40 °C to +100 °C as the operating temperature for the couplings. A replacement for Voss, Camozzi, Raufoss, SIRIT and WIRA fittings in the European aftermarket.

Category range, not per-model data: the sizes above are the Steel Air Brake Fittings range as published. The exact tube size, thread size and dimensions of the Male Elbow — Steel Air Brake Fittings are confirmed against the factory catalogue when you inquire — send the part number, or the tube and thread you need, and we quote the exact model.

Complete the circuit

Most buyers add the matched PA12 tubing, truck cables & coiled air lines or EBS lines to the same order — one quote, one shipment.

See companion lines →
Call +86-17825829635
Keep looking

Related products