Get a Quote

Home / Products / Steel Air Brake Fittings / Steel Bulkhead Union

Steel Bulkhead Union — Steel Air Brake Fittings, product photo
Steel Air Brake Fittings

Steel Bulkhead Union

Constructed from high-strength steel for maximum pressure tolerance and durability. These fittings are engineered to withstand extreme conditions and provide superior performance in the most demanding applications.

Category
Steel Air Brake Fittings
Material
Brass (as labelled on source site)
Tube sizes
6×1 · 8×1 · 10×1 · 12×1.5 · 15×1.5 · 16×2
Thread sizes
M12×1.5 · M14×1.5 · M16×1.5 · M22×1.5
Application
Heavy-duty truck and trailer

Key Features

  • Built to DOT FMVSS 571.106 / SAE J844 requirements (DOT range)
  • High-pressure resistance
  • Corrosion-resistant materials
  • Easy installation and maintenance
  • Wide temperature operating range

About the Bulkhead Union

The Bulkhead Union — Steel Air Brake Fittings is a Brass (as labelled on source site) fitting from the Steel Air Brake Fittings range. A bulkhead union passes a tube-to-tube joint through a panel or mounting. Locked to the panel with a nut, it joins two tube lengths while sealing and supporting the line where it crosses from one side to the other.

Where it fits

In a truck or trailer air brake circuit, this bulkhead union is used where a tube joint crosses a panel or mounting — for example at a reservoir outlet, where stored air feeds a relay valve. In the European aftermarket it is fitted to trucks and trailers running metric DIN 74324 / ISO 7628 air systems, and it is stocked by distributors as a direct replacement for the European brands.

Fitting the Bulkhead Union

Fitting the Bulkhead Union: To fit it, cut the nylon tube square, push it fully home into the collet until it seats, then pull it back to check it is locked. To remove it, press the release and pull the tube out. No spanner is needed on the tube side.

Sizes and standard

The Bulkhead Union — Steel Air Brake Fittings belongs to the Steel Air Brake Fittings range. Material: Brass (as labelled on source site). Category tube sizes: 6×1 · 8×1 · 10×1 · 12×1.5 · 15×1.5 · 16×2. Category thread sizes: M12×1.5 · M14×1.5 · M16×1.5 · M22×1.5. Built to DIN 74324 / ISO 7628 for the European aftermarket, for use with polyamide tubing. The range covers tube 6×1 to 16×2 and threads M12×1.5 to M22×1.5; the catalogue gives -40 °C to +100 °C as the operating temperature for the couplings. A replacement for Voss, Camozzi, Raufoss, SIRIT and WIRA fittings in the European aftermarket.

Category range, not per-model data: the sizes above are the Steel Air Brake Fittings range as published. The exact tube size, thread size and dimensions of the Bulkhead Union — Steel Air Brake Fittings are confirmed against the factory catalogue when you inquire — send the part number, or the tube and thread you need, and we quote the exact model.

Complete the circuit

Most buyers add the matched PA12 tubing, truck cables & coiled air lines or EBS lines to the same order — one quote, one shipment.

See companion lines →
Call +86-17825829635
Keep looking

Related products