Steel Air Brake FittingsSteel Straight Connector
Steel · Tube 6×1 …
View product →Home / Products / Steel Air Brake Fittings / Steel Banjo

Constructed from high-strength steel for maximum pressure tolerance and durability. These fittings are engineered to withstand extreme conditions and provide superior performance in the most demanding applications.
The Banjo — Steel Air Brake Fittings is a Brass (as labelled on source site) fitting from the Steel Air Brake Fittings range. A banjo fitting uses a hollow bolt through a ring-shaped body, so an air line can be connected at a right angle in a very tight space — for example on a valve or compressor head where a straight or elbow fitting would not fit. The bolt's cross-drilling feeds air from the line into the body.
In a truck or trailer air brake circuit, this banjo is used in a tight spot on a valve or compressor head — for example at a reservoir outlet, where stored air feeds a relay valve. In the European aftermarket it is fitted to trucks and trailers running metric DIN 74324 / ISO 7628 air systems, and it is stocked by distributors as a direct replacement for the European brands.
Fitting the Banjo: To fit it, cut the nylon tube square, push it fully home into the collet until it seats, then pull it back to check it is locked. To remove it, press the release and pull the tube out. No spanner is needed on the tube side.
The Banjo — Steel Air Brake Fittings belongs to the Steel Air Brake Fittings range. Material: Brass (as labelled on source site). Category tube sizes: 6×1 · 8×1 · 10×1 · 12×1.5 · 15×1.5 · 16×2. Category thread sizes: M12×1.5 · M14×1.5 · M16×1.5 · M22×1.5. Built to DIN 74324 / ISO 7628 for the European aftermarket, for use with polyamide tubing. The range covers tube 6×1 to 16×2 and threads M12×1.5 to M22×1.5; the catalogue gives -40 °C to +100 °C as the operating temperature for the couplings. A replacement for Voss, Camozzi, Raufoss, SIRIT and WIRA fittings in the European aftermarket.
Category range, not per-model data: the sizes above are the Steel Air Brake Fittings range as published. The exact tube size, thread size and dimensions of the Banjo — Steel Air Brake Fittings are confirmed against the factory catalogue when you inquire — send the part number, or the tube and thread you need, and we quote the exact model.
Most buyers add the matched PA12 tubing, truck cables & coiled air lines or EBS lines to the same order — one quote, one shipment.
See companion lines →
Steel Air Brake FittingsSteel · Tube 6×1 …
View product →
Steel Air Brake FittingsSteel · Tube 6×1 …
View product →
Steel Air Brake FittingsSteel · Tube 6×1 …
View product →
Steel Air Brake FittingsBrass (as labelled on source site) · Tube 6×1 …
View product →