RAUFOSS Push-In FittingsRAUFOSS WABCO Series
Brass + Plastic · Tube 6×1 …
View product →Home / Products / RAUFOSS Push-In Fittings / RAUFOSS Union Connector

Compatible with Raufoss systems, these push-in fittings offer quick and secure connections. Designed for easy installation and maintenance, they provide reliable pneumatic connections in commercial vehicle applications.
The Union Connector — RAUFOSS Push-In Fittings is a Brass fitting from the RAUFOSS Push-In Fittings range. A union joins two tubes end to end, so a damaged section of air line can be replaced, or two lengths coupled into one continuous line. Both ends grip the tube mechanically, and the joint can be taken apart for service without cutting the line.
In a truck or trailer air brake circuit, this union connector is used where two tube lengths are joined — for example at a reservoir outlet, where stored air feeds a relay valve. In the European aftermarket it is fitted to trucks and trailers running metric DIN 74324 / ISO 7628 air systems, and it is stocked by distributors as a direct replacement for the European brands.
Fitting the Union Connector: To fit it, cut the nylon tube square, push it fully home into the collet until it seats, then pull it back to check it is locked. To remove it, press the release and pull the tube out. No spanner is needed on the tube side.
The Union Connector — RAUFOSS Push-In Fittings belongs to the RAUFOSS Push-In Fittings range. Material: Brass. Category tube sizes: 6×1 · 8×1 · 10×1 · 12×1.5 · 15×1.5 · 16×2. Category thread sizes: M12×1.5 · M14×1.5 · M16×1.5 · M22×1.5. Built to DIN 74324 / ISO 7628 for the European aftermarket, for use with polyamide tubing. The range covers tube 6×1 to 16×2 and threads M12×1.5 to M22×1.5; the catalogue gives -40 °C to +100 °C as the operating temperature for the couplings, and up to 12.5 bar for the ABC coupling. Compatible with Raufoss ABC and P5 systems, and with WABCO air brake systems.
Category range, not per-model data: the sizes above are the RAUFOSS Push-In Fittings range as published. The exact tube size, thread size and dimensions of the Union Connector — RAUFOSS Push-In Fittings are confirmed against the factory catalogue when you inquire — send the part number, or the tube and thread you need, and we quote the exact model.
Most buyers add the matched PA12 tubing, truck cables & coiled air lines or EBS lines to the same order — one quote, one shipment.
See companion lines →
RAUFOSS Push-In FittingsBrass + Plastic · Tube 6×1 …
View product →
RAUFOSS Push-In FittingsBrass + Plastic (or full Brass for some variants) · Tube 6×1 …
View product →
RAUFOSS Push-In FittingsBrass + Plastic · Tube 6×1 …
View product →
RAUFOSS Push-In FittingsBrass · Tube 6×1 …
View product →