Get a Quote

Home / Products / RAUFOSS Push-In Fittings / RAUFOSS ABC Swivel Series

RAUFOSS ABC Swivel Series — RAUFOSS Push-In Fittings, product photo
RAUFOSS Push-In Fittings

RAUFOSS ABC Swivel Series

Compatible with Raufoss systems, these push-in fittings offer quick and secure connections. Designed for easy installation and maintenance, they provide reliable pneumatic connections in commercial vehicle applications.

Category
RAUFOSS Push-In Fittings
Material
Brass + Plastic
Tube sizes
6×1 · 8×1 · 10×1 · 12×1.5 · 15×1.5 · 16×2
Thread sizes
M12×1.5 · M14×1.5 · M16×1.5 · M22×1.5
Application
Heavy-duty truck and trailer

Key Features

  • Built to DOT FMVSS 571.106 / SAE J844 requirements (DOT range)
  • High-pressure resistance
  • Corrosion-resistant materials
  • Easy installation and maintenance
  • Wide temperature operating range

About the ABC Swivel Series

The ABC Swivel Series — RAUFOSS Push-In Fittings is a Brass + Plastic fitting from the RAUFOSS Push-In Fittings range. A swivel elbow turns an air line through 90 degrees and rotates after installation, so the tube can be pointed in the right direction without twisting the line or loosening the thread. It is used where the final tube routing is only fixed once the fitting is already tightened into its port.

Where it fits

In a truck or trailer air brake circuit, this abc swivel series is used where a line must turn and the routing is set after tightening — for example at a reservoir outlet, where stored air feeds a relay valve. In the European aftermarket it is fitted to trucks and trailers running metric DIN 74324 / ISO 7628 air systems, and it is stocked by distributors as a direct replacement for the European brands.

Fitting the ABC Swivel Series

Fitting the ABC Swivel Series: To fit it, cut the nylon tube square, push it fully home into the collet until it seats, then pull it back to check it is locked. To remove it, press the release and pull the tube out. No spanner is needed on the tube side.

Sizes and standard

The ABC Swivel Series — RAUFOSS Push-In Fittings belongs to the RAUFOSS Push-In Fittings range. Material: Brass + Plastic. Category tube sizes: 6×1 · 8×1 · 10×1 · 12×1.5 · 15×1.5 · 16×2. Category thread sizes: M12×1.5 · M14×1.5 · M16×1.5 · M22×1.5. Built to DIN 74324 / ISO 7628 for the European aftermarket, for use with polyamide tubing. The range covers tube 6×1 to 16×2 and threads M12×1.5 to M22×1.5; the catalogue gives -40 °C to +100 °C as the operating temperature for the couplings, and up to 12.5 bar for the ABC coupling. Compatible with Raufoss ABC and P5 systems, and with WABCO air brake systems.

Category range, not per-model data: the sizes above are the RAUFOSS Push-In Fittings range as published. The exact tube size, thread size and dimensions of the ABC Swivel Series — RAUFOSS Push-In Fittings are confirmed against the factory catalogue when you inquire — send the part number, or the tube and thread you need, and we quote the exact model.

Complete the circuit

Most buyers add the matched PA12 tubing, truck cables & coiled air lines or EBS lines to the same order — one quote, one shipment.

See companion lines →
Call +86-17825829635
Keep looking

Related products