Get a Quote

Home / Products / RAUFOSS Push-In Fittings / RAUFOSS Male Adapter

RAUFOSS Male Adapter — RAUFOSS Push-In Fittings, product photo
RAUFOSS Push-In Fittings

RAUFOSS Male Adapter

Compatible with Raufoss systems, these push-in fittings offer quick and secure connections. Designed for easy installation and maintenance, they provide reliable pneumatic connections in commercial vehicle applications.

Category
RAUFOSS Push-In Fittings
Material
Brass + Plastic
Tube sizes
6×1 · 8×1 · 10×1 · 12×1.5 · 15×1.5 · 16×2
Thread sizes
M12×1.5 · M14×1.5 · M16×1.5 · M22×1.5
Application
Heavy-duty truck and trailer

Key Features

  • Built to DOT FMVSS 571.106 / SAE J844 requirements (DOT range)
  • High-pressure resistance
  • Corrosion-resistant materials
  • Easy installation and maintenance
  • Wide temperature operating range

About the Male Adapter

The Male Adapter — RAUFOSS Push-In Fittings is a Brass + Plastic fitting from the RAUFOSS Push-In Fittings range. A male adapter connects a tube to a female-threaded port, or changes from one thread size to another. It is used where the port on a valve, reservoir or brake chamber does not match the tube size: the adapter's thread fits the port, and its push-in end takes the tube.

Where it fits

In a truck or trailer air brake circuit, this male adapter is used where a tube meets a female-threaded port — for example at a reservoir outlet, where stored air feeds a relay valve. In the European aftermarket it is fitted to trucks and trailers running metric DIN 74324 / ISO 7628 air systems, and it is stocked by distributors as a direct replacement for the European brands.

Fitting the Male Adapter

Fitting the Male Adapter: To fit it, cut the nylon tube square, push it fully home into the collet until it seats, then pull it back to check it is locked. To remove it, press the release and pull the tube out. No spanner is needed on the tube side.

Sizes and standard

The Male Adapter — RAUFOSS Push-In Fittings belongs to the RAUFOSS Push-In Fittings range. Material: Brass + Plastic. Category tube sizes: 6×1 · 8×1 · 10×1 · 12×1.5 · 15×1.5 · 16×2. Category thread sizes: M12×1.5 · M14×1.5 · M16×1.5 · M22×1.5. Built to DIN 74324 / ISO 7628 for the European aftermarket, for use with polyamide tubing. The range covers tube 6×1 to 16×2 and threads M12×1.5 to M22×1.5; the catalogue gives -40 °C to +100 °C as the operating temperature for the couplings, and up to 12.5 bar for the ABC coupling. Compatible with Raufoss ABC and P5 systems, and with WABCO air brake systems.

Category range, not per-model data: the sizes above are the RAUFOSS Push-In Fittings range as published. The exact tube size, thread size and dimensions of the Male Adapter — RAUFOSS Push-In Fittings are confirmed against the factory catalogue when you inquire — send the part number, or the tube and thread you need, and we quote the exact model.

Complete the circuit

Most buyers add the matched PA12 tubing, truck cables & coiled air lines or EBS lines to the same order — one quote, one shipment.

See companion lines →
Call +86-17825829635
Keep looking

Related products