Get a Quote

Home / Products / Brass Compression Fittings / Brass Compression Male Elbow

Brass Compression Male Elbow — Brass Compression Fittings, product photo
Brass Compression Fittings

Brass Compression Male Elbow

Traditional and highly reliable brass fittings that provide a secure, leak-proof seal through compression. These time-tested designs offer exceptional durability and performance in critical applications.

Category
Brass Compression Fittings
Material
Brass
Tube sizes
Inch · Metric
Thread sizes
UNF · SAE · Metric
Application
Critical air brake and fluid applications

About the Male Elbow

The Male Elbow — Brass Compression Fittings is a Brass fitting from the Brass Compression Fittings range. An elbow fitting turns an air line through 90 degrees. It is used where a tube must leave a valve, reservoir or brake chamber and run along a chassis rail or frame member: the fitting takes the corner so the tube itself is never bent sharply or kinked. The push-in end accepts the tube, and the threaded end screws into the port.

Where it fits

In a truck or trailer air brake circuit, this male elbow is used where a line must turn at a port — for example at a reservoir outlet, where stored air feeds a relay valve. It is used on copper, nylon and plastic tube in air brake and fluid circuits.

Fitting the Male Elbow

Fitting the Male Elbow: To fit it, slide the nut and then the ferrule onto the tube in that order, push the tube fully into the fitting body, then tighten the nut so the ferrule grips the tube and seals the joint.

Sizes and standard

The Male Elbow — Brass Compression Fittings belongs to the Brass Compression Fittings range. Material: Brass. Category tube sizes: Inch · Metric. Category thread sizes: UNF · SAE · Metric. A brass compression fitting: the nut tightens a ferrule onto copper, nylon or plastic tube for a leak-proof seal. Tube sizes in this category are inch and metric, threads UNF, SAE and metric. The SAE compression range in the factory catalogue is rated up to 2,000 psi depending on tube size. Per-model sizes are confirmed against the factory catalogue at inquiry.

Category range, not per-model data: the sizes above are the Brass Compression Fittings range as published. The exact tube size, thread size and dimensions of the Male Elbow — Brass Compression Fittings are confirmed against the factory catalogue when you inquire — send the part number, or the tube and thread you need, and we quote the exact model.

Complete the circuit

Most buyers add the matched PA12 tubing, truck cables & coiled air lines or EBS lines to the same order — one quote, one shipment.

See companion lines →
Call +86-17825829635
Keep looking

Related products